Syscoin 3 with Masternodes Cold Setup Unofficial Guide assuming a clean install

PLEASE USE THIS GUIDE THIS NOW MAKES IT A LOT EASIER

https://www.justinsilver.com/technology/cryptocurrency/syscoin-3-0-masternode-configuration/

Log back onto your Server using Putty with the Username and password you created in the VPS guide not as Root.

$ sudo apt-get install git
$ git clone https://www.github.com/syscoin/syscoin
$ cd syscoin
$ sudo apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils libboost-all-dev libminiupnpc-dev
$ sudo apt-get install software-properties-common
$ sudo add-apt-repository ppa:bitcoin/bitcoin
$ sudo apt-get update
$ sudo apt-get install libdb4.8-dev libdb4.8++-dev
$ ./autogen.sh
$ ./configure
$ make -j$(nproc)
// (This will take 40 minutes or more, install BM and QT whilst waiting, do not shut Putty down)

$ sudo make install

Make sure you Encrypt your wallet as per the guide and do not forget this password otherwise you have lost access to your funds.

You should also backup your wallet at this point, go to File Backup

$ mkdir ~/.syscoincore
$ cd ~/syscoin/src
$ ./syscoind
//To check its started wait 30 secs and type
$ ./syscoin-cli getinfo

Introduce your masternode to the network:

Install sentinel: Sentinel is a watchdog for your node which communicates to the network that your node is working properly.

Please ensure you are still in syscoin/src directory 
(cd ~/syscoin/src)
$ sudo apt-get update
$ sudo apt-get install -y git python-virtualenv
$ git clone https://github.com/syscoin/sentinel.git
$ cd sentinel

Start your masternode :

Setup Sentinel cronjob:

$ cd ..
$ ./syscoin-cli masternode status